![]() Again, just type in the precise scale for your drawing, and hit the Print button. You are now ready to print your drawing to scale. ![]() After a few test pages, you should be able to exactly match up the line drawn on the test page with one inch on you ruler. In that case, we would probably want to double the size of the “dots per inch” in the Printer DPI box. The first is the typical 180 protractor with a six-inch ruler along the bottom. Alternatively, the PDF files provide protractors with clearer text and sharper lines. Click the image to open the full-sized image (PNG). For example, let us say that the line was actually only half an inch. This allows you to look through the protractor while you use it. If the line is actually greater than an inch, then you will want to decrease the “dots per inch” in the Printer DPI box. ![]() If the line is less than an inch, you will want to increase the “dots per inch” in the Printer DPI box. Measure the actual distance of the line with the ruler. It will also have a line that is approximately one inch long drawn on it. Slide this ruler across the surface of plans, maps, and blueprints and read the measurement on the digital display in one of 111 different scales including inches, feet, yards, miles, centimeters, meters, kilometers, or a scale you define. The test page will have some instructions on it. To print a test page, click the Test print button and wait for your printer to print the test page. So, you will first want to print the test page. If you adjusted the scale of your drawing so that “one inch on the screen represents 10 feet” and hit the Print button, then you can be assured that one inch on your paper would represent exactly 10 feet in the “real world”. You actually can, in fact, zoom to a precise scale, if you want to. Select Properties Change units to inches, etc. If you say, “I want 1 inch on my computer monitor or printer to translate into 10 feet”, you are basically describing the precise scale that you want for drawing to appear on your monitor/printer. While in Paint, select the down arrow in the blue box in the upper left of the window. The scale is the number of feet/inches or meters that one inch on your computer monitor or your printer represents in the “real world”.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |